Finished Products
  • Hot Rolled Steel Coils
  • Wire Rod
  • D-bar
  • Hot Rolled Round Bar
  • Forged Round Bar
  • H-beam
  • Channel
  • I-beam
  • Angle
  • ERW Steel and Hot Dip Galvanized Steel Pipes
  • Seamless Steel Pipe
  • Hot Rolled Steel Coils in Sheets
  • Shipbuilding Plates
  • Hot Rolled Steel Plates
  • Tin Plate Sheet
  • Pre-Painted Galvanized Galvalume Steel Coils and Sheets
  • Hot Dipped Galvanized Steel Coils and Sheets
  • Galvalume (Aluzinc) Steel Coil
Informations
Description
Product
Hot Rolled Steel Coils
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, AISI, ASTM, GB, DIN, EN
Grade
Q195/Q235/Q345, S235/S275/S355JR/JO,SS400, A36, SPHC/SPHD/SPHE, SAE1006/1008/1010/1012, SPHT1/2/3, A283 Gr.C, A572 Gr.50,SPA-H, SM490A or equivalent.
Size
1.4-23mm x 900-2300mm x C
Hot rolled steel coils are a feedstock for cold rolled coil and coated coil, but are also suitable for direct use in a variety of industrial applications including steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines.
 
Informations
Description
Product
Wire Rod
Certification
-
Standard
-
Grade
Q195, Q215, Q235, SAE1006-1022, 12L14, SWRCH12A, HML10, H08A, SWRM6, 35ACR, 40ACR, 20Cr,40Cr, 20CrMo, 35CrMo
Size
Dia 5.5mm to 32.00mm
Hot rolled from steel billet, wire rod is delivered as coil, most commonly at 6.5mm dia and up to sizes of 60mm dia. The most important characteristic for determining a rod's end use is its drawability which is the extent to which the rod's diameter can be reduced during the drawing process.
 
Informations
Description
Product
D-bar
Certification
-
Standard
-
Grade
JIS-SD390, HRB335, HRB400, HRB500, BS4449 Gr. 500, ASTM A615 GRADE 60
Size
Dia. 8-32mm
This bar type is formed from a steel billet, normally having surface deformations for the use in reinforcing concrete. The bar can be produced in straight lengths as well as coiled.
 
Informations
Description
Product
Hot Rolled Round Bar
Certification
-
Standard
-
Grade
10# 20# 45# Q195 Q235 Q345 etc
Size
Dia 12mm to 310mm
Hot-rolled round bars are formed with hot-rolled finished steel, pressed low carbon steel and alloy steel in high temperature conditions and then naturally cooled. It is one of the steel products with the largest application variety, stretching fields from civil engineering to architecture. Hot-rolled round bars are mainly used for the reinforcement of concrete and pre-stressed concrete structures.
 
Informations
Description
Product
Forged Round Bar
Certification
-
Standard
-
Grade
34CrNiMo, 34CrNi3Mo, 34CrNiMo6, 18CrNiMnMoA, 4Cr13MoV, 48CrMo, 30CrNi3MoV, 4Cr14Mo, 35CrNi3W, 21CrMoV, 4Cr13V, 45MnMo, 30Mn2MoW, 19Mn, 36SNiMo16
Size
Dia 200mm to 1000mm
Forged round bars are hot-rolled and forged with micro-alloy formation impacting the final performance of the steel. Manufactured in accordance with state-of-the-art production methods in cutting and hot-forging, forged round bars yield sufficient fatigue strength.
 
Informations
Description
Product
H-beam
Certification
-
Standard
-
Grade
Q235,Q345,SS400,SS490,S235JR,S235JO,S235J2,S275JR,S275JO,S275J2,S355JR,S355JO,S355J2
Size
From 100mm x 100mm to 800mm x 300mm
H-shaped beams have a more efficient cross-section profile with an optimized load leveling. This construction element has a simple light weight construction with a right angle arrangement and bending ability.
 
Informations
Description
Product
Channel
Certification
-
Standard
-
Grade
Q235、Q345、09CuPTiRE、SS400
Size
From 100*48mm to 220*79mm
A channel is a groove-shaped strip of steel. The channel is mainly used in building structures, manufacturing of vehicles and other industrial structures. The channel is also often used in combination with an I-beam.
 
Informations
Description
Product
I-beam
Certification
-
Standard
-
Grade
Q235B, Q345B, SS400, ASTM A36, S235JRG2, S235JR, S275JR
Size
From 160*88mm to 250*116mm
An I-beam is a beam with an I-shaped cross-section. While the vertical element of the "I" resists shear forces, the horizontal elements resist most of the bending moment experienced by the beam.
 
Informations
Description
Product
Angle
Certification
-
Standard
-
Grade
Q345, 09CuPTiRE, Q235
Size
From 50*50mm to 140*140mm
The structure of angles is composed according to a variety of different force components. Angles are widely used as connecting elements in various building structures and engineering structures, such as beams, bridges, transmission towers, hoisting and conveying machinery, ships, industrial furnace, reaction tower or container frames, etc.
 
Informations
Description
Product
ERW Steel and Hot Dip Galvanized Steel Pipes
Certification
-
Standard
-
Grade
BS1387, ASTM A53, ASTM A500, API 5L, DIN 2440, DIN 10240, DIN 10255
Size
On demand
Galvanized steel pipes are widely used in applications where rust resistance is needed, and can be identified by the crystallization pattern on the surface.
 
Informations
Description
Product
Seamless Steel Pipe
Certification
-
Standard
-
Grade
ASTM A106
Size
19.5mm to 820mm x 1.5mm to 25mm
Seamless steel pipes are one kind of long rolled steel products which have a hollow section and no seam at the peripheral. They are widely used in mechinery components such as drill pipe, truck drive shaft, bicycle frame and construction falsework.
 
Informations
Description
Product
Hot Rolled Steel Coils in Sheet Form
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, AISI, ASTM, GB, DIN, EN
Grade
Q195/Q235/Q345, S235/S275/S355JR/JO,SS400, A36, SPHC/SPHD/SPHE, SAE1006/1008/1010/1012, SPHT1/2/3, A283 Gr.C, A572 Gr.50,SPA-H, SM490A or equivalent.
Size
1.4-23mm x 900-2300mm x L
Hot rolled steel coils in sheet form are used in a wide variety of general structures and industrial applications.
 
Informations
Description
Product
Shipbuilding Plates
Certification
ROHS, ISO, IBR, BV, SGS
Standard
LR, ABS, DNV, BV, NK,GL, KR, CCS etc.
Grade
A/B/D/E/AH32-AH40, DH32-DH60,EH32-EH60, FH32-FH60
Size
12-50mm x 2000-5000mm x 6000-18000mm
Shipbuilding plate is used for manufacturing sea-going ships and large inland ship steel structures.
 
Informations
Description
Product
ROHS, ISO, IBR, BV, SGS
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, ASTM, EN
Grade
Commercial, Low alloy, High Strength, Abrassion
Size
6-150mm x 2000-5000mm x 6000-18000mm
The material is used in the shipbuilding, pressure equipment and construction industries.
 
Informations
Description
Product
Tin Plate Sheet
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, AISI, ASTM, GB, DIN, EN
Grade
MR, L, D, T1-6
Size
0.15-0.80mm x 700-2000mm x C
Around 90% of tinplate is used in packaging, with food and drinks cans being the biggest market. On the other hand it is also widely used for other general packaging needs, such as consumer goods, aerosols, paints and oils.
 
Informations
Description
Product
Pre-Painted Galvanized Galvalume Steel Coils and Sheets
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, ASTM, EN, GB
Grade
SGCC/DX51D+Z08-275(Base Metal)
Size
0.23-1.5mm x 900-1250mm x C
The coating of the steel sheet improves durability and lengthens product life. It is manufactured to meet specific customer requirements for corrosion resistance, strength and formability. Thickness, width, surface quality and surface are professionally finished. Building applications account for around two thirds of consumption, with cladding of building steel frames being a well known use. It is also widely used for domestic appliance casings and for some furniture.
 
Informations
Description
Product
Hot Dipped Galvanized Steel Coils and Sheets
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, ASTM, GB, EN
Grade
SGCC, DX51D/ASTM A653 or equivalent.
Size
0.17-4.0mm x 1000-1500mm x C
Hot dipped galvanized coil has excellent forming properties and is suitable for fabrication by forming, pressing and bending. Applications include domestic appliances, building applications, automotive parts, lighting fixtures, drums and various kinds of sections and profiled sheets.
 
Informations
Description
Product
Galvalume (Aluzinc) Steel Coil
Certification
ROHS, ISO, IBR, BV, SGS
Standard
JIS, ASTM,GB
Grade
SGLCC, ASTM A792 or equivalent
Size
0.23-2.0mm x 900-1250mm x C
This type of steel coil is highly heat and corrosion resistant, combining the properties of aluminum and zinc. While aluminium renders increased durability, excellent heat resistance, and formability, zinc offers high heat resistance and excellent corrosion protection. It is widely used for construction (roofing material, side-wall material, partition, soundproof wall, duct, shutter, garage door, fencing), automotive components (muffler, exhaust silence boxes, exhaust pipe, oil filter tube, bus floor, truck bottom, air cleaner cover, hose clamp, brake pad cover), electrical (home) appliances (vending machine, gas boiler, gas oven, toaster, air conditioner/heater, washer, light shade).
 
Hot Rolled Steel Coils
Wire Rod
D-bar
Hot Rolled Round Bar
Forged Round Bar
H-beam
Channel
I-beam
Angle
ERW Steel and Hot Dip Galvanized Steel Pipes
Seamless Steel Pipe
Hot Rolled Steel Coils in Sheets
Shipbuilding Plates
Hot Rolled Steel Plates
Tin Plate Sheet
Pre-Painted Galvanized Galvalume Steel Coils and Sheets
Hot Dipped Galvanized Steel Coils and Sheets
Galvalume (Aluzinc) Steel Coil